Pleated High-Flow Cartridges For Bag Filter Housing

The platinum select series is a pleated style bag filter offering greater surface area, large dirt holding capacity, high flow rates and low cost. This filter is ideal for catalyst recovery due to its size and ease of use.

Characteristics

  • Multiple pleated layers construction • High filtration area
  • High flow-rate
  • High dirt holding capacity
  • Filtration direction from in to out
  • Sealing gasket suitable for the majority of bag filter housings
  • Inner core for high mechanical strength
  • Outer cage to protect the pleated media
  • Designed to fit in bag filter housing size 1 and 2
  • No fibre releasing
  • Wide range chemical compatibility
  • Polypropylene hardware
  • Fusion bonding assembly
  • Four different filter media available
  • FDA approved materials (only for full polypropylene model)
  • 1935/2004/CE certification available upon request (only PP version)
  • Absolute filtration rating from 0.6 to 80 μm

Max. Working Temperature

80®C

Differential Pressure

Cartridge replacement 2.0 bar @ 50 °C
Max. allowable: 2.4 bar @ 20 °C
1.8 bar @ 50 °C

Materials of Construction

Filter media:

  • Polypropylene
  • Polyester
  • Fiberglass
  • Polypropylene melt-blown

Hardware

Polypropylene.

Gaskets

  • Buna-n
  • Viton
  • EPDM (standard)
  • Silicone

Dimensions

External diameter 6” (152 mm)
Length: Size 1
Size 2

Filtering Area

Pleated standard Size 1: 2.0 m2 Size 2: 4.1 m2
Pleated depth Size 1: 0.7 m2 Size 2: 2.0 m2
Melt-blown Size 1: 0.13 m2 Size 2: 0.32 m2

Flow-rate / Delta-P data - DHC

Micron (μm) Polypropylene
Size 1 Size 2
0.6 3 6
1 3.6 7.2
3 8.7 17.4
5 13.2 26.4
10 18 36
25 21 40
≥ 50 30 40
Glass Fibre
Size 1 Size 2
9 18
15 30
17 32
20 40
27 40
31.5 40
40 40
Melt-blown
Size 1 Size 2
n.a. n.a.
n.a. n.a.
4 8
8 16
9.5 19
12 24
18 36
DHC
Size 1 Size 2
1150 2350
1250 2500
1300 2600
1300 2600
1350 2700
1450 2900
1650 3300

Liquids flow-rate(m3/h) - Initial Delta-P 0.1 bar - DHC (gr).
For liquids different than water, multiply Delta-P by viscosity.
Flow-rate valid for clean water, reduce the flow-rate according to the application.

Filtration efficiency/ Filtration rating availability

(μm) Efficiency
Pleated Melt-blown
99.98% 90% 99.98% 90%
0.6 0.6 μm 0.25 μm n.a. n.a.
1 1 μm 0.45 μm 1 μm 0.6 μm
3 3 μm 0.80 μm 3 μm 1 μm
5 5 μm 2.0 μm 5 μm 3 μm
10 10 μm 4.5 μm 10 μm 5 μm
25 25 μm 10 μm 25 μm 10 μm
50 50 μm 25 μm 50 μm 30 μm
80 80 μm 60 μm 80 μm 55 μm

Filtration efficiency for liquids defined with Multipass ISO 4572 test.

Filter media Filtration rating (μm)
0.6 1 3 5 10 25 50 80
Polypropylene X X X X X X X X
Fiberglass X X X X X X
Polyester X X X X X X
Melt-blown X X X X X X X

Flow Characteristics

Photo

RR Retention Rating
MT Maximum temperature recommended of a working product in degrees centigrade
MoC Primary material of construction
MoC Primary material of construction
MP Maximum working pressure of housing in bar
Brand Manufacturing brand name supplying the product
FE Filter efficiency
Q Quality assurances and certificates validating this product