Ultrafilter High-Performance Filter

FF / MF / SMF with nanotechnology

  • 450% greater filter media compared to standard elements
  • lower differential pressure
  • improved filtration efficiency
  • greater dirt-capturing capacity
  • 70% less energy costs


  • Binderfree, thermally welded nanofilter media
  • Oleophobe filter media
  • Pleated filter media
  • Support sleeves of stainless steel (316L)


  • Low differential pressure and high particle load
  • Rejects oil and water
  • 450% more filtration surface, higher particle load capacity, low air flow speed
  • Extremely large free flow, secure and long operation

Materials of Manufacture

Outer foam sock Blue polyurethane foam sock up to 80°C
HT/CR sock up to 120°C
HT/NX sock up to 180°C
Support sleeved inner/outer Stainless steel 1.4301
Pre- and after filter medium Pleated Cerex
Filter medium Binderfree nanofibres of borosilicate
Bonding Polyurethane
End caps Aluminium
O-rings Perbunan, silicon free and free of parting compounds

Retention rate at a particle size of 0,01 μm

FF 99,999%
MF 99,99998%
SMF 99,99999%

Residual oil content at an inlet of 3 mg/m3

FF 0,1 mg/m3
MF 0,03 mg/m3
SMF < 0,01 mg/m3

Max. differential pressure

5 bar at 20°C, independent from operation pressure

Start-up differential pressure

FF 0,04 bar
MF 0,08 bar
SMF 0,09 bar
RR Retention Rating
MT Maximum temperature recommended of a working product in degrees centigrade
MoC Primary material of construction
MoC Primary material of construction
MP Maximum working pressure of housing in bar
Brand Manufacturing brand name supplying the product
FE Filter efficiency
Q Quality assurances and certificates validating this product