High Flow

Radially pleated High Flow cartridge. Ideal for pre RO, Mains water. Single cartridge capable of 80m3/hr meaning smaller systems, less change outs and faster filter changes.

High Flow Capability

The unique construction of CUNOTM High Flow Filters (patent pending) permits flow rates of up to 113 m3/hr (500 gpm) in a single cartridge. The result? Fewer filter elements to accommodate your flow requirements. In fact, the CUNOTM High Flow Filtration System requires as few as one-tenth the number of elements as competitive 2.5” (63,5 mm) pleated cartridges (see Figure 1).

Materials of Manufacture

Filter Media

Each grade of the CUNOTM High Flow Filter is manufactured from melt-blown FDA compliant polypropylene microfibre media, providing high particle removal efficiency with broad chemical compatibility. No adhesives, binders, or silicone are used in the manufacturing process. The raw materials composing these filters are FDA compliant according to CFR Title 21. All support layers and hardware are constructed with polypropylene.

O-rings

O-rings are available in a variety of materials to suit your applications, including the standard nitrile, Ethylene Propylene Rubber (EPR), silicone, and fluorocarbon.

Operating Parameters by Cartridge Length

Operating Conditions Elements Length (nominal)
40'' 60''
Maximum Operating Temperature (°C/°F) 71 / 160
Maximum Recommended Flow Rate in water @ 21°C/70°F (m3 per hr / gpm) 80 / 350 113 / 500
Maximum Forward Differential Pressure (50 psid @ 68°F) 3.4 bar @ 20°C
Recommended Change-out Differential Pressure 2.4 bar @ 20°C
(35 psid @ 68°F)
Regulatory Status - All component materials of the CUNO™ High Flow polypropylene element are listed for food contact per 21 CFR.

Applications

CUNO™ High Flow Filter Applications:

  • Industrial
    Municipal Water, RO Prefiltration, Reclaimed Water, Coolants, Nozzle Protection, Boiler Condensate
  • Chemical
    Quench Water, Aqueous Salt Solutions, Final Products
  • Petrochemicals
    Waterflooding, Produced Water, Enhanced Oil Recovery, Completion Fluids, Amine Sweetening, Final Products
  • Electronics
    RO Prefiltration, Process Water
  • Food & Beverage
    Process Water
  • Pharmaceutical
    Process Water
Features Benefits
High flow capability of up to 113 m3/h (500 gpm) per cartridge Reduced Filter Usage - minimizes product loss, labour, disposal costs, operator exposure, and downtime for filter change-out
Patent Pending Compound Radial Pleat design High loading capacity for long life and lower cost filtration
Compact design Smaller housing minimizes capital expense requirements;
Reduces system footprint
Absolute rating Reproducible effluent quality throughout the filter's life
Easy to Use No special tools or hardware required for filter change-out - minimizes downtime;
"Twist to lock" seating mechanism provides positive seal;
Ergonomically designed handle - facilitates easy cartridge installation and removal
FDA compliant Compatible in applications requiring direct food contact in food and beverage processing per 21 CFR.

Photo

Product Attributes
RR 1 to 70μ
MT80 ̊C
MoC Polypropylene
MDP 3.4bar @20 ̊C
Brand 3M
Q FDA compliant to CFR title 21
RR Retention Rating
MT Maximum temperature recommended of a working product in degrees centigrade
MoC Primary material of construction
MoC Primary material of construction
MP Maximum working pressure of housing in bar
Brand Manufacturing brand name supplying the product
FE Filter efficiency
Q Quality assurances and certificates validating this product